Quick Contact
Please Contact Us

Product & Services

DTH is short for "Down-The-Hole"

  • Since the DTH method was originally developed to drill large-diameter holes downwards in surface-drilling applications.
  • its name originated from the fact that the percussion mechanism followed the bit down into the hole.
  • Applications were later found for the DTH method underground.
  • The direction of drilling is generally upwards instead of down wards.
  • DTHis short for "Down-The-Hole".
  • In DTH drilling, the percussion mechanism commonly called the hammer is located directly behind the drill bit.
  • The drill pipes transmit the necessary feed force and rotation to hammer and bit plus compressed air or fluids for the hammer and flushing of cuttings.
  • The piston strikes the impact surface of the bit directly, while the hammer casing gives straight and stable guidance of the drill bit.

Down to Hole

  • ROTARY DRILLS
  • They are meant for drilling in alluvial and semi-consolidated formations and for virgin areas in connection with exploration program, by using drillingmudfluid.

  • RATED CAPACITY:
  • 8" [203mm] holes upto 2000 Ft [610 Mts] directly using 2.7/8" [73mm] OD Drill Pipes. 8" [203mm] - 10" [254mm] holes upto 2000 Ft [610 mts] directly using 3.1/2" [88.9mm]ODDrill pipes.

  • CASING LOAD:
  • 27500 lbs [12500 Kgs.] by using Single sheave Travelling Block 55000 lbs [25000 Kgs.] by using Double sheave Travelling Block.

  • MAST:
  • Heavy Duty Tubular Steel Construction Electric welded 46 Ft [14.0 mts] high above Ground Level during drilling 90000 lbs [41000 Kgs] Gross Load capacity 5 Sheaves + 1 catline sheave Raised and lowered by two hydraulic cylinders with safety check valves.

  • DRILL HEAD:
  • Rotary Type as integral unit with Draw works and Hydraulic pull down. 4.1/2" [114.3mm] Hydraulic Retraction - 21" [533.4mm] Disc, Type Friction Clutch.

  • CATHEAD:
  • Shaft mounted provided on the right side of the drill head Heavy Duty Tubular Steel Construction Electric welded 46 Ft [14.0 mts] high above Ground Level during drilling 90000 lbs [41000 Kgs] Gross Load capacity 5 Sheaves + 1 catline sheave Raised and lowered by two hydraulic cylinders with safety check valves.

  • PULL DOWN:
  • 16000 lbs [7272 Kgs] pull down through twin hydraulic cylinders having 30" [762mm] stroke.

  • DRAW WORKS:
  • Hoisting and sand reel drum having baredrum single line pull of 16000 lbs [7272 Kgs] each Barrel dia x length each drum - 7" [178mm] x 10.3/8" [263.5mm] High leverage Mechanical type Brakes, Single/Double on drums Chain Driven with multiple Disc Friction clutch.

  • MUD PUMP:
  • 'PRECISION' Model 'S-200' 8" [203mm] x 6" [152mm] positive displacement Duplex Double action Mud pump with interchangeable liners as per operational requirements having wider choice of discharge/pressure. 'V' Belts/Chain Drive.

  • HYDRAULIC SYSTEM:
  • 21USGPM[80 LPM] 1500 PSI [105Kg/cm2] - Fixed displacement vane type pump.

  • MOUNTING & PRIME MOVER:
  • Truck / Trailer. Powered by Truck Engine and/or suitable independent Engine(s).

  • MOUNTING & PRIME MOVER:
  • Truck / Trailer. Powered by Truck Engine and/or suitable independent Engine(s).

  • TRANSMISSION:
  • 5 Forward and 1 Reverse.

  • KELLY:
  • 4.1/8" [104.7mm]ODx 28 ft [8.53 mts] long 3 flutted round kelly.

  • LIGHTING:
  • Truck Battery/Alternator.(24 Volts DC)

  • LEVELLING JACKS:
  • 4 Nos. Mechanical / Hydraulic

  • CONTROLS:
  • 4 Nos. Mechanical / Hydraulic

  • OPTIONAL:
  • Longer Mast Choice of Mud Pumps Choice of Hydraulic pumps Hydraulic Breakout System Air clutches Diesel generating set for lighting DTH attachments for drilling by DTH method Casing drum Hydraulic leveling jacks Chain pull down having stroke length of 20 feet.

DTH RIG


Trucking

DTH 500



Trucking

DTH 1000



Trucking

DTH 1500



Trucking

DTH 2000



Please fill up form. We will send you a broucher on your mail id.